Dekso 25

Dekso 25

Product Description

  • Semi-matt wall paint.
  • Recommended for premises with high functional and special aesthetic requirements that are frequently exposed to dirt and wear and tear.

Unique Features

  • Wall paint
  • Distinct gloss
  • Extra robust surface

Environmental Information

Protection equipment for: Spray painting: painting suit, full face mask with combined filter. Painting: eye protection, gloves. Sanding: respiratory protection.
Environment information: Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.


  • Kitchens, washrooms, commercial premises, institutions, clinics, light industrial premises, stairways and stairwells.
  • Concrete, lightweight concrete, plaster, bricks, gypsumboards, fiber plaster, cement fiber boards, cement particle boards.
Nominal spreading rate (m2/l)


Must be clean, dry, solid and suitable for surface treatment.


  • Remove loose material and paint by cleaninng and sanding.
  • Remove dirt, grime, grease and chalking materials with Fluren 37.
  • Water blotches or surfaces stained by nicotine or soot must be cleaned with Fluren 49 and treated with Stop Primer.
  • Hard, smooth surfaces should be sanded matt and painted with Fix Primer as required.
  • Cracks, unevenness and holes must be spackled.
  • Absorbent and porous substrates must be primed with Flügger Sealer
  • Priming is done with Combi Primer or Special Primer.
  • Apply 1-2 times. Some colours require an extra treatment.
Class 1


  • Brush, roller or spray
  • Decide your choice of tool/utensil depending on the finish
  • Apply wet on wet and finish by brushing/rolling in the same direction
  • Always use the same batch number on contiguous/unbroken surfaces
  • Differences in surface structure can result in colour deviation
  • Cold/heat can affect the viscosity of the material
  • Material temperature for spray painting, min. 12⁰C
  • Condensation during drying/curing must not occur.
  • Cold and increased humidity extends drying time, full curing and recoat interval
  • Increased temperature and low atmospheric humidity reduce drying time and full curing
  • Always perform a test treatment for a check and acceptance of adhesion and result



Dry to touch at 20°C, 60% RF (Hours)
Recoatable at 20c, 60% RF (Hours)
Fully cured at 20c, 60% RF (Days)

Cool, frost free and tightly closed

Cleaning of Tools etc.
Water and soap

Technical Data

Density (kg/liter)
Weight %
Volume %
Total emission
350 Emission cf. EN16000-9:2006 (< µg/m²h after 28 days)
Water, is usually not diluted
Max. humidity 80 % RH.