Flutex 10

Flutex 10

Flutex 5, 7, 10 and 20 are eco-labelled acrylic paints. Hiding power, robustness and adhesion are priorities. A perfect choice in terms of quality and economy.

Product Description

Matt wall paint. Recommended for premises with high functional requirements where the surface is exposed to dirt and wear and tear.
  • Wall paint
  • Distinct gloss
  • Extra robust surface

Usage

Hall areas, entrance areas, offices, kitchens, washrooms, commercial premises, institutions, clinics, light industrial premises, shops, stairways and stairwells.
Concrete, lightweight concrete, plaster, bricks, gypsumboards, fiber plaster, cement fiber boards, cement particle boards.

Substrate

Must be clean, dry, solid and suitable for surface treatment.

Treatment

Remove loose material and paint by cleaninng and sanding.
Remove dirt, grime, grease and chalking materials with Fluren 37.
Water blotches or surfaces stained by nicotine or soot must be cleaned with Fluren 49 and treated with Stop Primer.
Hard, smooth surfaces should be sanded matt and painted with Fix Primer as required.
Cracks, unevenness and holes must be spackled.
Absorbent and porous substrates must be primed with Flügger Sealer
Priming is done with Combi Primer or Special Primer.
Apply 1-2 times. Some colours require an extra treatment.

Application

Brush, roller or spray
Decide your choice of tool/utensil depending on the finish
Apply wet on wet and finish by brushing/rolling in the same direction
Always use the same batch number on contiguous/unbroken surfaces
Differences in surface structure can result in colour deviation
Cold/heat can affect the viscosity of the material
Material temperature for spray painting, min. 12⁰C
Condensation during drying/curing must not occur.
Cold and increased humidity extends drying time, full curing and recoat interval
Increased temperature and low atmospheric humidity reduce drying time and full curing
Always perform a test treatment for a check and acceptance of adhesion and result

Matt strong surface.
Uniform even structure with distinct gloss.
Withstands cleaning including spot cleaning with brush, water and cloth.
Strong especially dark shades are more delicate than light by wear and touch.
Chalking from strong shades due to excess pigment may occur.
Does not block strike-through from knots or water-soluble colourants, water stains and nicotine.
Exercise care in loading the surface until the paint is fully cured.

Technical Data

Producttype
Acrylic Paint
Gloss
10,Silk Matte
Density (kg/liter)
1.38
Weight %
56,3
Volume %
39,6
Nominal spreading rate (m2/l)
8
Min. +10°C
Humidity
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
1
Recoatable at 20c, 60% RF (Hours)
4
Fully cured at 20c, 60% RF (Days)
28
Total emission
59 Emission cf. EN16000-9:2006 (< µg/m²h after 28 days)
Washability
Class 1
Dilution
Water, is usually not diluted
10
Cleaning of Tools etc.
Water

Storage: Cool, frost free and tightly closed

Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.:

Version

August 2020